Pioneer DVR-541H-S operating instructions Editing a timer program, Deleting a timer program

Recording 05

•For a DVD timer recording, if Optimized Rec (see Optimized Rec on page 116) is set to On, the recorder will adjust the recording quality to try and fit the recording on the disc. If the recording will not fit onto the disc even on MN1 (MN4 for DVD+R/+RW) recording quality then the Recovery Recording feature will automatically make the recording to the HDD instead.

•If there is very little free space left on the HDD, an Auto Replace Recording may not complete successfully.

•If the HDD is being used for playback or high-speed copying when an Auto Replace Recording is due to start, the new timer recording will not replace the old one. However, the next time the timer recording starts, both of the older two programs will be erased.

Editing a timer program

You can change any of the settings in a timer program before the recording is due to start.

1Press TIMER REC.

2Highlight the timer program you want to change.

3 Press then select ‘Modify’ from the command menu panel.

Alternatively, press ENTER.

The Timer Program Set screen appears from which you can edit the settings.

4Edit the timer recording settings as necessary.

5Select ‘Store Program’ to finish. Confirm the settings you made from the following screen.

Deleting a timer program

You can delete timer programs you no longer need.

1Press TIMER REC.

2Highlight the timer program you want to erase.

3 Press then select ‘Erase’ from the command menu panel.

•Select Yes to confirm or No to cancel.

•You can also just press CLEAR when the timer program is highlighted.

Skipping a regular timer program

If you’ve set a regular daily or weekly timer program, you can set the recorder to skip the next scheduled recording.

1Press TIMER REC.

2Highlight the timer program you want to skip.

3 Press then select ‘Cancel Once’ from the command menu panel.

•In the timer program list, Cancel Once appears by the program.

• You can also just press PAUSE when the timer program is highlighted.

Extending a timer recording in progress

You can extend a timer recording beyond the programmed end time in two different ways. This can be useful if a broadcast program overruns, for example.

43

En