Pioneer DVR-541H-S Playback, Playing DVD discs, Start playback, DVD+R/DVD+RW only, Enter

06Playback

PLAY

3 Start playback.

•If you’re playing a DVD-Video or Video CD, a disc menu may appear when you start playback. Use the

buttons and ENTER to navigate DVD disc menus, and the number buttons and ENTER for Video CD menus.

•When playing video from the HDD, playback will automatically stop after the end of a title is reached.

•There may be a slight pause when playback switches from the first to the second layer of a dual-layer disc.

•See the following sections for more details on playing specific kinds of discs.

STOP

4 Press to stop playback.

5When you’ve finished using the recorder, eject the disc and switch the recorder back into standby.

Playing DVD discs

The table below shows the basic playback controls for DVD-Video, and recordable DVD discs.

PLAY Press to start playback. If RESUME is displayed on-

screen, playback starts from the place last stopped.

STOP Press to stop playback.

You can resume playback from the same point by pressing PLAY. (Press STOP again to cancel the resume function.)

PAUSE Pauses playback, or restarts

playback when paused.

REV SCAN FWD SCAN Press to start scanning. Press repeatedly to increase the scan- ning speed.

		Press to skip to previous/next
PREV	NEXT
		chapter/title. (During playback
		you can also use the front panel
		CH +/– buttons.)
		DVD+R/DVD+RW only:
		PREV may not always skip to
		the previous title.

ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

CLEAR

CLEAR

ENTER

Except VR mode: During play- back, enter a chapter number then press ENTER to skip directly to that chapter within the currently playing title.

On some discs, you can also use the number buttons to select numbered items in the disc menu.

VR mode only: During playback, enter a title number then press

ENTER.

All: Press CLEAR to clear a number entry and start again.

54

En