Pioneer DVR-541H-S operating instructions Initial Setup menu

The Initial Setup menu			14
Setting	Options	Explanation
HELP Setting	On •	Switches on the automatic Help screens for GUI dis-
		plays.
	Off	Switches off the automatic Help screens for GUI dis-
		plays. (Press HELP on the remote to manually display
		the Help screen.)
Setup Navigator	Start	Select to start the Setup Navigator. See also Switch-
		ing on and setting up on page 28.
Tuner
Auto Channel	Next Screen	Proceed to the next screen, select your country, then
Setting		wait for automatic tuning to complete. The channel
		mapping screen should appear when the recorder is
		set up. Press ENTER to exit this screen.
Manual CH Setting	Next Screen	Proceed to the next screen if you need to adjust any
		of the settings made by auto tuning. Select your
		country, then proceed to the manual channel setting
		screen:
		• Change channel presets using the	PREV /

NEXT buttons.

	• To skip the displayed channel (because there is no
	station assigned to that channel), change the Skip
	setting to On.
	• Set the CH SYSTEM setting to match the channel
	system of your country or region.
	• Set the CHANNEL setting to the channel you want
	to assign to the current channel preset.
	• To manually fine tune the channel, change the AFT
	setting to Off then adjust the Level setting.
	• Set the Sound System setting to match the
	sound system of your region.
	• The Name field allows you to input a name of up to
	five characters for the current channel preset.
Channel Swapping Next Screen	Proceed to the next screen to swap channel
	assignments of different presets so that you can
	group together presets that naturally go together.
	Select two presets to swap then press ENTER.

111

En