Pioneer DVR-541H-S Selecting other languages for language options, About Ntsc on PAL TV

14The Initial Setup menu

About NTSC on PAL TV

Depending on the Input Line System setting and the NTSC on PAL TV setting, the signal format output when the recorder is stopped varies as shown in the table below.

Input Line	NTSC on PAL	Output
System	TV	when
		stopped
625 System	Off	PAL
	On	PAL
525 System	Off	NTSC
	On	PAL–60

About the input color system

The available options of the Input Color System setting depend on the Input Line System setting. The table below shows the different options available.

Input Line	Built-in tuner	External
System		input
625 System	Auto	Auto
	PAL	PAL
	SECAM	SECAM
525 System	3.58 NTSC	Auto
		3.58 NTSC
		PAL–60

Additional information about component video output

If you switch the Component Video Out setting to Progressive when using a TV that is not compatible with progressive-scan video, you will not be able to see anything

displayed on your TV. If this happens, press and hold the STOP button on the front panel, then press PLAY. This will set the recorder’s video output back to Interlace.

Selecting other languages for language options

	ENTER
1	Select ‘Other’ from the

language list.

This option appears in the settings for DVD Menu Language, Audio Language, and Subtitle Language.

ENTER

2	Select the language you
want.
Initial Setup
Basic	OSD DVD Menu Language
Tuner	Audio Language	English
Video In/Out	Language
	Subtitle Language
Audio In	Auto LanguageNumber 0 5	1 4
Audio Out	DVD Menu Language
Language	Subtitle Display
Recording
Playback

•Select by language name: Use the buttons to change the language.

• Select by code number: Press then use the number buttons to enter the four-digit language code.

See Language code list on page 133 for a list of available languages and corresponding codes.

120

En