Pioneer HTS-570, SX-SW570 operating instructions 02Connecting up, Y-cable To Receiver subwoofer

02Connecting up

2 Assemble the AM loop antenna.

a b c

a. Bend the stand in the direction indicated by the arrow.

b. Clip the loop onto the stand.

c. If you want to fix to a wall or other surface, perform step b after first securing the stand with screws.

It is recommended that you determine the reception strength before securing the stand with the screws.

3Connect the AM and FM antennas1.

a.Connect one wire of the AM loop antenna to each AM antenna terminal2.

For each terminal, press down on the tab to open; insert the wire, then release to secure.

•Twist and pull off the protective shields on each wire.

•Connect the wires to the speaker. Each speaker in the illustration can be identified by means of the color- coded indicator provided on the rear-surface model label. Match the color-coded wire with the color indicator on the model label, then insert the color- coded wire into the red (+) side and the other wire into the black (–) side.

•When connecting the center speakers, connect the Y- cable dual end to the two center speakers in the same way.

1

2

b. Push the FM antenna3 plug onto the center pin of the FM antenna socket.

4Connect each speaker.

•The front and surround speaker cables have a color- coded connector at one end and two bare wires at the other end.

Color-coded wire (Connect to speaker)

Color-coded connector (Connect to rear panel)

•Since there is only one terminal to connect the two center speakers, you will need to use the supplied Y- cable for the connection.

Y-cable

To Receiver subwoofer

•Connect the other end to the color-coded speaker terminals on the rear of the receiver subwoofer. Make sure to insert completely.

The small lug at the wire-end of the speaker plug should face up or down depending on whether it’s being plugged into one of the upper or lower speaker terminals. Please make sure to connect correctly.

Upper terminal Lower terminal

Note

1 • Keep antenna cables away from other cables, the display unit and receiver subwoofer.

•If reception with the supplied antenna is poor, see Improving poor FM reception and Improving poor AM sound on page 23 or Connecting external antennas on page 27.

•Do not attach any antenna other than the provided loop antenna, or an external antenna as described on page 27.

2 • Don’t let it come into contact with metal objects and avoid placing near computers, television sets or other electrical appliances.

•If radio reception is poor, you may be able improve it by re-inserting each antenna wire into the opposite terminal.

•For best reception, do not untwist the AM loop antenna wires or wrap them around the loop antenna.

123 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.

En