02Connecting up
6If you have a DVD player or other source1 component you want to connect, connect it now before connecting the power cord in the next step.
See Connecting auxiliary components on page 27 for how to connect a digital source component.
7Connect the power cord.2
•Connect the power cord to AC inlet on the receiver subwoofer. Connect the power cord to a wall socket.
Wall mounting the display unit
It is possibe to mount the display unit on the wall.
Before mounting:
•Remember that the display unit is heavy and could cause the wood screws to work loose, or the wall material to fail to support it, resulting in the display falling. Make sure that the wall you intend to mount the display on is strong enough to support it. Do not mount on plywood or soft surface walls.
•Mounting screws are not supplied. Use screws that are suitable for the wall material and that will support the weight of the display.
•Pioneer bears no responsibility for accidents resulting from faulty assembly or installation, insufficient mounting strength of walls or other building fixtures, misuse or natural disasters.
•If you are unsure of the qualities and strength of the wall, consult a professional for advice.
7 1/8 in. | 5/32 in. |
(4 mm) | |
(181 mm) |
|
3/8 in. (10 mm)
Mounting screw (not supplied)
3/32 in. (2.5 mm)
Using this system for TV audio
If your TV has a stereo audio output you can connect it to this system and enjoy surround TV sound.
Important
•When connecting this system, be sure to switch power off and disconnect the power cord from the wall socket. Connect the power cord to the wall socket only after completing all other connections.
AUDIO INPUT |
| |
ITAL |
| ANALOG |
TV | PC/GAME | AUX |
TICAL) | (OPTICAL) |
L
MCACC |
| FM UNBAL 75 | AM LOOP ANTENNA |
SETUP MIC | CONTROL IN | AUDIO INPUT | |
|
| DIGITAL | ANALOG |
SYSTEM CONNECTOR | CONTROL |
| SPEAKERS | DVD | DTV | PC/GAME | AUX |
| OUT | SUBWOOFER | R SURROUNDRL | (COAXIAL) | (OPTICAL) | (OPTICAL) | |
|
|
|
|
|
|
| L |
R
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
AC IN | CENTER | R | FRONT | L |
1
To stereo audio outputs
TV
1Connect the audio output jacks on your TV to the AUX input jacks on the receiver subwoofer.
Use the red/white stereo audio cable (not supplied) for this connection. Make sure you match the left and right outputs with their corresponding inputs for correct stereo sound.
•You can use the AUX input jacks for any analog source you want, such as a tape deck, etc.
Note
1 Make sure to connect a TV or monitor (for video sources) to take advantage of this system’s home theater potential. Please refer to the instruction manual supplied with your TV or monitor for connection details.
2 • Do not use any power cord other than the one supplied with this system.
• Do not use the supplied power cord for any purpose other than connecting to this system.
14
En