05Listening to your system
Listening with Acoustic Calibration EQ
You can listen to sources using the Acoustic Calibration EQ set in Using the Auto MCACC setup for optimal surround sound on page 18.
|
| SLEEP |
ENTER | CLEAR |
|
SETUP |
| SR |
| TUNE |
|
ST | ST |
|
| ENTER |
|
SOUND |
| TEST |
TUNE | TONE | |
|
| |
SOUND |
|
|
RETRIEVER |
|
|
SURROUND | ADVANCED F.S.SURR | MCACC |
1 | Press SOUND. | |
2 | Use the | (cursor left/right) buttons to select |
MCACC EQ then press ENTER. | ||
3 | Use the | (cursor up/down) buttons to switch |
EQ ON or EQ OFF then press ENTER to confirm.
•On the EQ OFF setting, equalization is set to off and speaker settings (channel delay and channel level) remains as it is set.
•Acoustic Calibration EQ is set to on automatically after Auto MCACC setup is used.
Enhancing dialogue
The Dialogue Enhancement feature is designed to make the dialogue stand out from other background sounds in a TV or movie sound track.
1 | Press SOUND. | |
2 | Use the | (cursor left/right) buttons to select |
DIALOGUE then press ENTER. | ||
3 | Use the | (cursor up/down) buttons to select |
the amount dialogue enhancement then press ENTER to confirm.
Select between OFF, MID or MAX.
22
Using Quiet and Midnight listening modes
The Quiet listening feature reduces excessive bass or treble in a sound source.
The Midnight listening feature allows you to hear effective surround sound of movies at low volume levels.
1 | Press SOUND. | |
2 | Use the | (cursor left/right) buttons to select |
TONE then press ENTER. | ||
3 | Use the | (cursor up/down) buttons to select |
QUIET or MIDNIGHT then press ENTER to confirm.
•To cancel the Quiet or Midnight listening modes, select BASS/TRE.
Adjusting the bass and treble
Use the bass and treble controls to adjust the overall tone.
1 | Press SOUND. | |
2 | Use the | (cursor left/right) buttons to select |
TONE then press ENTER. | ||
3 | Use the | (cursor up/down) buttons to select |
BASS/TRE then press ENTER.
•Selecting BASS/TRE cancels the Quiet and Midnight listening modes. These modes cannot be used at the same time.
4 Use the | (cursor left/right) buttons to select | |
BASS or TREBLE; use the | (cursor up/down) |
buttons to adjust the sound then press ENTER to confirm.
Boosting the bass level
There are two bass modes you can use to enhance the bass in a source.
1 | Press SOUND. | |
2 | Use the | (cursor left/right) buttons to select |
BASSMODE then press ENTER. | ||
3 | Use the | (cursor up/down) buttons to select the |
sound then press ENTER to confirm. Select between OFF, MUSIC or CINEMA.
En