04Getting started
Chapter 4
Getting started
System demo setting
Switches the automatic demo feature on or off (this starts when you plug in for the first time).
|
|
| SLEEP |
|
| ENTER | CLEAR |
|
| SETUP | SR |
|
|
| TUNE |
|
| ST | ST |
|
|
| ENTER |
|
| SOUND | TEST |
|
| TONE | |
|
|
| TUNE |
|
| SOUND |
|
1 | Switch the system into standby. | ||
2 | Press SETUP. |
|
|
3 | Use the | (cursor left/right) buttons to select | |
DEMO from the menu, then press ENTER. | |||
4 | Use the | (cursor up/down) buttons to select a |
setting, then press ENTER. Select from:
•DEMO ON – Switches the demo display on.
•DEMO OFF – Switches the demo display off and the system into standby.
Using the Auto MCACC setup for optimal surround sound
The Multichannel Acoustic Calibration (MCACC) system measures the acoustic characteristics of your listening area, taking into account ambient noise, and testing for channel delay and channel level. After you have set up the microphone provided, the system uses the information from a series of test tones to optimize the speaker settings and equalization (Acoustic Calibration
EQ) for your particular room.1
Important
•The test tones used for Auto MCACC setup are loud; however, do not turn the volume down during setup as this may result in a
•Make sure the microphone and speakers are not moved during the MCACC setup.
ST | ST |
| ENTER |
SOUND | TEST |
TONE | |
| TUNE |
STANDBY/ON | SOUND |
| RETRIEVER |
MUTE
VOLUME
SURROUND ADVANCED F.S.SURR MCACC
DVD DTV PC/GAME AUX
CHANNELVOLUME
TUNER
TVINPUT
1Connect the microphone to the MCACC SETUP MIC jack on the rear panel.
MCACC
SETUP MIC
| MCACC |
|
| FM UNBAL 75 | AM LOOP ANTENNA | ||
|
|
|
| AUDIO INPUT |
| ||
| SETUP MIC | CONTROL IN |
|
| |||
|
|
|
|
| DIGITAL |
| ANALOG |
SYSTEM CONNECTOR CONTROL | SPEAKERS |
| DVD | DTV | PC/GAME | AUX | |
OUT | SUBWOOFER | R SURROUND | L | (COAXIAL) | (OPTICAL) | (OPTICAL) | |
|
|
|
|
|
|
| L |
USE ONLY WITH DISPLAY UNIT. |
|
|
|
|
|
| R |
SEE INSTRUCTION MANUAL. |
|
|
|
|
|
|
|
AC IN | CENTER | R FRONT | L |
|
|
|
|
Note
1 You only need to use the Auto MCACC setup once (unless you change the placement of your speakers or your room layout).
18
En