Section
13
Detailed instructions
#If the connection fails, Error is displayed. In such cases, try again from the beginning.
#The PIN code is set to 0000 as the default, but can be changed. Refer to Entering PIN code for Bluetooth wireless connection on the next page.
#When establishing connection, the icon is dis- played.
Touch the icon to disconnect the device.
Disconnecting a Bluetooth device.
#If you want to delete a paired Bluetooth tele- phone, display Delete OK?. Touch Yes to delete the device.
Deleting a paired device.
#Never turn the unit off while the paired Blue- tooth telephone is being deleted.
Using a Bluetooth device to pair
(Function of
If you cannot open the connection between your Bluetooth device and this unit from your Bluetooth device, you can use this function to establish a connection.
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 24.
2Touch Special Device to select the spe-
cial device.
# Bluetooth devices that are difficult to establish a connection with are called special devices. If your Bluetooth device is listed as a special device, select the appropriate one.
3Touch the special device list to open the connection.
This unit is now on standby for a connection
with the Bluetooth device.
# If five devices are already paired,
Memory Full is displayed and pairing cannot be performed. In such cases, delete a paired device first. Refer to Deleting a paired device. on this page.
4Use your Bluetooth device to establish a connection.
The connection method is different depending on the Bluetooth device. Refer to the manual for your Bluetooth device to establish a con- nection.
While connecting, Pair your phone is dis- played. If the connection is established,
Paired is displayed.
# If the connection fails, Error is displayed. In
such cases, try again from the beginning.
# The PIN code is set to 0000 as the default, but can be changed. Refer to Entering PIN code for
Bluetooth wireless connection on the next page.
Connecting to a Bluetooth device automatically
(Function of
If this function is set to on, a connection between your Bluetooth device and this unit will take place automatically as soon as the two devices are less than a few meters apart. Initially, this function is set to on.
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 24.
2Touch Auto Connect to turn automatic connection on.
If your Bluetooth device is ready for a Blue- tooth wireless connection, a connection to this unit will automatically be established.
50
En