Section

13Detailed instructions

Registering a connected

Connecting a Bluetooth

cellular phone

audio player

(Function of AVH-P4200DVD/AVH-P3200DVD) You can register a phone that is temporarily connected to this unit in order to take full advantage of the features available with Blue- tooth wireless technology. Only one cellular phone can be registered.

1Start registering a connected cellular phone.

Refer to Introduction of Bluetooth telephone op- erations on page 29.

2Use cellular phone to register to this unit.

If registration is successful, the device name of the connected phone is displayed in the se-

lected assignment.

# If the assignment is already taken, the device name will be displayed. To replace an assignment with a new phone, first delete the current assign-

ment.

# If registration failed, the device name of the connected phone will not be displayed in the se- lected assignment. In such cases, return to step

1and try again.

Voice recognition

(Function of AVH-P4200DVD/AVH-P3200DVD) If your cellular phone features voice recognition technology, you can make a call by voice commands.

!Operation varies depending on the type of cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.

1 Start voice recognition.

Refer to Introduction of Bluetooth telephone operations on page 29.

2 Say the name of your contact aloud.

(Function of AVH-P4200DVD/AVH-P3200DVD) A Bluetooth wireless connection can be established by putting the unit into initiating a connection mode.

%Put the unit in initiating a connection mode.

Refer to Bluetooth audio operations on page 30.

This unit is now on standby for connection from Bluetooth audio player.

If your Bluetooth audio player is set ready for

Bluetooth wireless connection, connection to this unit is automatically established.

Connecting to a Bluetooth device automatically

(Function of AVH-P4200DVD/AVH-P3200DVD) If this function is set to on, a connection between your Bluetooth device and this unit will take place automatically as soon as the two devices are less than a few meters apart. Initially, this function is set to on.

1Touch Auto Connect to turn automatic connection on.

Refer to Introduction of Bluetooth telephone op- erations on page 29.

If your Bluetooth device is ready for a Blue- tooth wireless connection, a connection to

this unit will automatically be established.

# To turn automatic connection off, touch Auto Connect again.

2Turn your vehicle's ACC switch off and on.

Displaying BD (Bluetooth Device) address

(Function of AVH-P4200DVD/AVH-P3200DVD) This unit displays its BD address.

52 En