Detailed instructions
# To turn automatic connection off, touch | verify the connection. The default code is |
Auto Connect again. | 0000, but you can change it with this function. |
3 Turn your vehicle's ACC switch off and | 1 Display the Bluetooth Connection |
on. | Menu. |
| |
|
Section
13
Detailed
Switching visible unit
(Function of
This function sets whether or not to make this unit visible to the other device.
Initially, this function is set to on.
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 24.
2Touch Visibility to select visibility off.
!To turn visibility on, touch Visibility again.
Displaying BD (Bluetooth Device) address
(Function of
This unit displays its BD address.
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 24.
2Touch Bluetooth Version to select de-
vice information.
The BD address is displayed.
Entering PIN code for Bluetooth wireless connection
(Function of
To connect your Bluetooth device to this unit via Bluetooth wireless technology, you need to enter a PIN code on your Bluetooth device to
2Touch PIN Code Input to select PIN code input.
3Touch 1 to 0 to input pin code.
4After inputting PIN code (up to 8 di- gits), store in this unit.
Storing the PIN code in this unit.
Using a cellular phone to initiate a connection
A Bluetooth wireless connection can be established from your phone by putting the unit into initiating a connection mode.
You may need to refer to the operation manual that came with your phone if you are unsure how to initiate a connection from your phone.
1Put the unit in initiating a connection mode.
Refer to Introduction of Bluetooth telephone op- erations on page 29.
2Use a cellular phone to connect to this
unit.
# Operation varies depending on the type of cel-
lular phone.
# You may need to enter the link code on your cellular phone to complete the connection.
instructions
En 
51