Section

 

 

 

 

 

 

 

 

 

 

14

 

Menu operations

 

 

 

 

System settings

3 Touch Rear Speaker on the system

 

 

Switching the auxiliary setting

menu to switch the subwoofer output or

 

 

full-range speaker.

 

 

Activate this setting when using an auxiliary

# When no subwoofer is connected to the rear

 

 

device connected to this unit.

output, select Full (full-range speaker).

 

 

1 Display the system menu.

# When a subwoofer is connected to the rear

 

 

output, select Subwoofer (subwoofer).

 

 

Refer to Introduction of menu operations on

# When the rear output setting is Subwoofer,

 

 

page 54.

you cannot operate the following procedure.

 

 

2 Touch AUX Input on the system menu

Notes

 

 

to turn AUX Input on or off.

 

 

! Even if you change this setting, there is no

 

 

 

 

 

 

Setting AV input

output unless you turn the subwoofer output

 

 

on (refer to Using subwoofer output on page

 

 

Activate this setting when using an external

56).

 

 

 

video component connected to this unit.

! If you change this setting, subwoofer output

 

 

1 Display the system menu.

in the audio menu will return to the factory

 

 

settings.

 

 

Refer to Introduction of menu operations on

 

 

! Both rear speaker lead outputs and RCA rear

 

 

page 54.

 

 

output are switched simultaneously in this

 

 

 

 

 

 

2 Touch AV Input on the system menu to

setting.

 

 

 

 

 

 

turn AV Input on or off.

 

 

Setting the rear output and subwoofer controller

This unit’s rear output (rear speaker leads output and RCA rear output) can be used for full- range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a sub- woofer without using an auxiliary amp. Initially, the unit is set for a rear full-range speaker connection (Full).

1 Turn the unit off.

Refer to Basic Operations on page 11.

2 Display the system menu.

Refer to Introduction of menu operations on page 54.

Switching sound muting/ attenuation

Sound from this system is automatically muted or attenuated when a signal from equipment with a mute function is received.

!Sound from this system returns to normal when the muting or attenuation is can- celed.

1 Display the system menu.

Refer to Introduction of menu operations on page 54.

2Touch Mute/ATT until the desired set- ting appears.

Touch Mute/ATT until the desired setting ap- pears in the display.

!Mute – Muting

!ATT -20dB – Attenuation (ATT -20dB has a stronger effect than ATT -10dB)

!ATT -10dB – Attenuation

!Off – Turns the sound muting/attenuation off

62 En