Section
14
Detailed instructions
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 27.
2Touch Device Information to display de-
vice information.
The Bluetooth device address is displayed.
Entering PIN code for Bluetooth wireless connection
(Function of
To connect your Bluetooth device to this unit via Bluetooth wireless technology, you need to enter a PIN code on your Bluetooth device to verify the connection. The default code is
0000, but you can change it with this function.
1Display the Bluetooth Connection Menu.
Refer to Introduction of Bluetooth telephone op- erations on page 27.
2Touch PIN Code Input to select
PIN code input.
3Touch 1 to 0 to input pin code.
4After inputting PIN code (up to 8 di- gits), store in this unit.
Storing the PIN code in this unit.
Using a cellular phone to initiate a connection
(Function of
A Bluetooth wireless connection can be established from your phone by putting the unit into initiating a connection mode.
You may need to refer to the operation manual that came with your phone if you are unsure how to initiate a connection from your phone.
1Put the unit in initiating a connection mode.
Refer to Introduction of Bluetooth telephone op- erations on page 32.
2Use a cellular phone to connect to this
unit.
# Operation varies depending on the type of cel-
lular phone.
# You may need to enter the link code on your cellular phone to complete the connection.
Registering a connected cellular phone
(Function of
You can register a phone that is temporarily connected to this unit in order to take full advantage of the features available with Blue- tooth wireless technology. Only one cellular phone can be registered.
1Start registering a connected cellular phone.
Refer to Introduction of Bluetooth telephone op- erations on page 32.
2Use cellular phone to register to this unit.
If registration is successful, the device name of the connected phone is displayed in the se-
lected assignment.
# If the assignment is already taken, the device name will be displayed. To replace an assignment with a new phone, first delete the current assign-
ment.
# If registration failed, the device name of the connected phone will not be displayed in the se- lected assignment. In such cases, return to step
1and try again.
54
En