Section

 

 

 

 

 

 

 

 

 

 

16

 

Other Functions

 

 

 

 

Adjusting the response

# To cancel the adjustment, press and hold

 

 

positions of the touch panels

MENU.

 

 

 

 

 

 

(Touch Panel Calibration)

7 Gently touch the center of the + mark

 

 

If you feel that the touch panel keys on the

displayed on the screen.

 

 

After you touch all the marks, the data for the

 

 

screen deviate from the actual positions that

 

 

adjusted position is saved.

 

 

respond to your touch, adjust the response po-

 

 

# Do not turn off the engine while the data is

 

 

sitions of the touch panel. There are two ad-

 

 

being saved.

 

 

justment methods: 4-point adjustment, in

 

 

 

 

 

 

which you touch four corners of the screen;

8 Press and hold MENU to complete the

 

 

and 16-point adjustment, in which you make

adjustment.

 

 

fine-adjustments on the entire screen.

 

 

 

 

! Touch the screen gently for adjustment.

 

 

 

 

 

Forcefully pressing the touch panel may da-

Using an AUX source

 

 

 

mage the touch panel. Do not use a sharp

 

 

 

A separately sold auxiliary device such as a

 

 

 

pointed tool such as a ballpoint pen or me-

 

 

 

chanical pen. Doing so may damage the

VCR or portable device can be connected to

 

 

 

screen.

this unit. When connected, the auxiliary device

 

 

! If the touch panel cannot be adjusted prop-

is automatically recognized as an AUX source

 

 

 

erly, consult your local Pioneer dealer.

and is assigned to AUX.

 

 

1 Turn the unit off.

About AUX connection methods

 

 

Refer to Basic operations on page 13.

 

 

2 Press and hold MENU to display

You can connect auxiliary devices to this unit.

 

 

 

 

 

 

Picture Adjustment.

Mini pin plug cable (AUX)

 

 

3 Press and hold MENU to start Touch

 

 

When connecting an auxiliary device using a

 

 

Panel Calibration.

 

 

mini plug cable

 

 

The 4-point touch panel adjustment screen ap-

 

 

iPods and portable audio/video players can be

 

 

pears.

 

 

connected to this unit via mini plug cable.

 

 

 

 

 

 

4 Touch each of the arrows on the four

! If an iPod with video capabilities is con-

 

 

nected to this unit via 3.5 mm plug (4 pole)

 

 

corners of the screen.

 

 

cable (such as the CD-V150M), you can

 

 

# To cancel the adjustment, press and hold

 

 

enjoy the video contents of the connected

 

 

MENU.

 

 

iPod.

 

 

 

 

 

 

5 Press MENU to complete 4-point adjust-

! A portable audio/video player can be con-

 

 

ment.

nected by using a 3.5 mm plug (4 pole) with

 

 

Data for the adjusted position is saved.

an RCA cable (sold separately). However,

 

 

# Do not turn off the engine while the data is

depending on the cable, a reverse connec-

 

 

being saved.

tion between the red (right side audio)

 

 

6 Press MENU to proceed to 16-point ad-

cable and yellow (video) cable may be re-

 

 

quired in order for the sound and video

 

 

justment.

 

 

image to be reproduced correctly.

 

 

The 16-point touch panel adjustment screen

 

 

 

 

 

 

appears.

 

 

72 En