Section

Menu operations

 

15

Audio Adjustments

Display

Equalizer curve

Note

Vocal

Vocal

When selecting FM as the source, you cannot

Custom1

Custom 1

switch to Source Level Adjuster.

 

 

Using fader/balance adjustment

You can change the fader/balance setting to provide an ideal listening environment for all of the occupied seats.

1Display the audio function menu. Refer to Introduction of menu operations on the previous page.

2Touch Fader/Balance on the audio func- tion menu.

3Touch aor bto adjust the front/rear speaker balance.

Range: Front:15 to Rear:15

# Select F/R: 0 L/R: 0 when only using two

speakers.

# The front/rear speaker balance cannot be ad- justed when the rear output setting is Subwoofer. Refer to Setting the rear output and subwoofer controller on page 64.

4Touch cor dto adjust the left/right speaker balance.

Range: Left:15 to Right:15

Custom2

Custom 2

Flat

Flat

 

 

Super Bass

Super bass

 

 

!The equalizer curves for Custom1 and Custom2 can be adjusted.

!You cannot select Custom1 and Custom2 when using the auto-equalizer.

!When Flat, no changes are made to the sound. You can check the effects of the equalizer curves by switching alternatively between Flat and another equalizer curve.

1Display the audio function menu. Refer to Introduction of menu operations on the previous page.

2Touch Graphic EQ on the audio function

menu.

# You can select Graphic EQ when Auto EQ function is off.

3Touch cor dto select the desired item. Powerful—Natural—Vocal—Custom1— Custom2—Flat—Super Bass

Adjusting the 8-band graphic equalizer

operations Menu

Using the equalizer

You can adjust the equalization to match the car’s interior acoustic characteristics as de- sired.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves.

Display

Equalizer curve

 

 

 

 

PowerfulPowerful

NaturalNatural

You can adjust the level of each band for the equalizer curves.

!A separate Custom1 curve can be created for each source. If you make adjustments when a curve other than Custom2 is se- lected, the equalizer curve settings will be stored in Custom1.

!A Custom2 curve that is common for all sources can be created. If you make adjust- ments when the Custom2 curve is se- lected, the Custom2 curve will be updated.

1Display the audio function menu. Refer to Introduction of menu operations on the previous page.

En 57