Menu operations

Section

15

Boosting the bass

You can boost the bass level.

1Display the audio function menu. Refer to Introduction of menu operations on page 56.

2Touch cor dto select a desired level. Range: 0 to +6

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers.

1Display the audio function menu. Refer to Introduction of menu operations on page 56.

2Touch cor dnext to Frequency to se- lect cut-off frequency.

Off (off)—50Hz—63Hz—80Hz—100Hz— 125Hz

Only frequencies higher than those in the se- lected range are output from the front or rear speakers.

3Touch Source Level Adjuster on the audio function menu.

4Touch aor bto adjust the source vo- lume.

Range: +4 to –4

Notes

!The AM volume level can also be adjusted with this function.

!Video CD, CD, compressed audio and DivX are automatically set to the same source level adjustment volume.

!iPod and USB storage device are automati- cally set to the same source level adjustment volume.

!External unit 1 and external unit 2 are automa-

tically set to the same source level adjustment volume.

operations Menu

Adjusting source levels

With SLA (source level adjustment), the volume levels of each source can be adjusted to prevent significant differences between sources.

!Settings are based on the FM volume level, which remains unchanged.

1Display the audio function menu. Refer to Introduction of menu operations on page 56.

2Compare the FM volume level with the level of the source you wish to adjust.

En 59