Section

 

 

 

 

 

 

 

 

 

 

15

 

Menu operations

 

 

 

 

System settings

3 Touch Rear Speaker on the system

 

 

Switching the auxiliary setting

menu to switch the subwoofer output or

 

 

full-range speaker.

 

 

Activate this setting when using an auxiliary

# When no subwoofer is connected to the rear

 

 

device connected to this unit.

output, select Full (full-range speaker).

 

 

1 Display the system menu.

# When a subwoofer is connected to the rear

 

 

output, select Subwoofer (subwoofer).

 

 

Refer to Introduction of menu operations on

Notes

 

 

page 56.

 

 

2 Touch AUX Input on the system menu

! Even if you change this setting, there will be

 

 

no output unless you turn the subwoofer out-

 

 

to turn AUX Input on or off.

 

 

put on (refer to Using subwoofer output on

 

 

 

 

 

 

 

 

page 58).

 

 

Setting AV input

! If you change this setting, subwoofer output

 

 

Activate this setting when using an external

in the audio menu will return to the factory

 

 

settings.

 

 

video component connected to this unit.

 

 

! Both rear speaker lead outputs and RCA rear

 

 

 

 

 

 

1 Display the system menu.

output are switched simultaneously in this

 

 

setting.

 

 

Refer to Introduction of menu operations on

 

 

 

 

 

 

page 56.

 

 

2Touch AV Input on the system menu to turn AV Input on or off.

Setting the rear output and subwoofer controller

This unit’s rear output (rear speaker leads output and RCA rear output) can be used for full- range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a sub- woofer without using an auxiliary amp. Initially, the unit is set for a rear full-range speaker connection (Full).

1 Turn the unit off.

Refer to Basic operations on page 13.

2 Display the system menu.

Refer to Introduction of menu operations on page 56.

Switching sound muting/ attenuation

Sound from this system is automatically muted or attenuated when a signal from equipment with a mute function is received.

!Sound from this system returns to normal when the muting or attenuation is can- celed.

1 Display the system menu.

Refer to Introduction of menu operations on page 56.

2Touch Mute/ATT until the desired set- ting appears.

Touch Mute/ATT until the desired setting ap- pears in the display.

!Mute – Muting

!ATT –20dB – Attenuation (ATT –20dB has a stronger effect than ATT –10dB)

!ATT –10dB – Attenuation

!Off – Turns the sound muting/attenuation off

64 En