Section
17Installation
Connecting the power cord
26 pin cable (Supplied with Navigation unit) | This product |
|
Navigation unit can be connected
Please contact your dealer to inquire about the connectable navigation unit.
Insert the 26 pin cable in the direction indicated in the figure.
RGB input
Antenna input
AUX jack (3.5 ø)
Use a mini plug cable to connect with auxiliary device.
Microphone input
Yellow
Connect to the constant 12 V supply terminal.
Orange/white
Connect to lighting switch terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean,
|
| White | Gray |
Front speaker |
| |
|
| |
| |
|
|
| |
Left |
| White/black | Gray/black |
|
| Green | Violet |
Rear speaker or |
| |
|
Fuse resistor
Fuse resistor
Front speaker
Right
Rear speaker or
Subwoofer (4 Ω) | |
|
|
| |
| Green/black | Violet/black |
Subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything to Green and Green/black leads.
Green | Violet | | |
Not used. |
|
| Subwoofer (4 Ω) |
|
| ||
Green/black | Violet/black |
| × 2 |
| |||
|
|
|
|
76 En