Assembling the Stand
Ìi
•Always assemble it on a flat table etc.
•Insert the screws in the holes vertically and do not tighten them with more force than necessary.
Assembly Procedure
2 Secure the support column to the stand with the Installation screws (4 locations on the left and right).
Using the enclosed hexagonal wrench, first loosely attach the top attachment screw, then loosely attach the bottom attachment screw.
1 Select the support columns to attach.
Select the support columns according to the Pioneer television that you have purchased (Only one type of the two types of available support columns should be used).
When the Pioneer television you have purchased
is under speaker models.
[Support column used: support column L (long columns)]
4VQQPSUDPMVNOVTFE |
TVQQPSUDPMVNO- |
MPOHDPMVNOT |
3 |
When the Pioneer television you have purchased
is except under speaker models.
[Support column used: support column S (short columns)]
4VQQPSUDPMVNOVTFE |
TVQQPSUDPMVNO4 |
TIPSUDPMVNOT |
| 5IFMBSHFSIPMFT |
*OTUBMMBUJPOTDSFXT | BSFPOUIFGSPOU |
.YNNTJMWFS |
|
Fully tighten the Installation screws (4 locations on the left and right).
'VMMZUJHIUFOUIFBUUBDINFOUTDSFXT |
Ìi |
Be sure to carefully store the unused support columns, the hexagonal wrench, the C wrench, and the Operating Instructions together.
En
