Attaching the Pioneer Television
The weight of a 50 inch Pioneer television | 3 |
(without speaker) is about 34 kg (75 lbs), they
have no depth, and are unstable. Therefore, #AUTION at least two people must assemble and install
them.
Ìi
•Be sure to install it on a flat stable location.
•Insert the screws in the holes vertically and do not tighten them with more force than necessary.
•Make sure that you install the support columns reliably with reference to the procedure in “Assembling the Stand”.
Attachment Method
1 Attaching the Pioneer television to the stand.
Fit the stand’s support columns to the bottom of the Pioneer television as indicated by the arrows, then slowly insert them vertically. Be extremely careful not to insert the support columns of the stand into any part of the Pioneer television other than the stand insertion slots. Note that doing so might damage the Pioneer television panel or its ports or result in the warping of the stand.
4 |
TVQQPSUTXJUIUIFCPUUPN |
PGUIF1JPOFFSUFMFWJTJPO |
BTJOEJDBUFEJOUIF |
BDDPNQBOZJOHEJBHSBN |
Securing the Pioneer television with Installation screws .
Attach the Pioneer television at the points marked with “T” using the enclosed hexagonal wrench.
| There have been cases where unforeseen |
| accidents such as the equipment breaking or |
#AUTION | falling over occurred because the stand was |
installed with wrong screws. |
*OTUBMMBUJPOTDSFXT |
.YNNCMBDL |
Attaching the speakers.
Refer to the operating instructions for the speaker for the installation method.
English
2 Securing the Pioneer television with Installation screws .
Secure them using the enclosed hexagonal wrench.
*OTUBMMBUJPOTDSFXT |
.YNNTJMWFS |
En
