Fixing the rotation to the front
Stabilize the equipment as shown in the diagram using screws that are available on the market.
Ìi
Use a screw that has a nominal diameter of M4 and length from 20 mm to 30 mm (13/16 to
NNUPNN | UPJODI |
.
NNUPNN
UPJODI
Detaching the Pioneer Television from the Stand
To remove the Pioneer television from the stand, be sure to always follow the procedure
#AUTION described below to prevent accidents.
1 First, confirm that the forward/backward inclination anchor bolt is securely tightened.
2 First clear a space on a flat floor etc. where you can lay the Pioneer television flat, then lay a sheet to protect it from scratches or other damage.
3 Remove the speakers.
4 Referring to steps 2 and 3 in “Attaching the Pioneer Television” (Page 5.), remove the installation screws (4 screws).
Ìi
Do not remove the screws (M8 x 16 mm: silver) by procedure 2 in Page 5. The support columns might slip out of place and fall over.
5 Holding the Pioneer television by its handles and from the bottom, lift the display vertically.
6 Place the Pioneer television slowly onto the sheet laid out in step 2 with its screen facing downwards.
Ìi
When reattaching the Pioneer television to the stand, be certain that the left/right support columns are set at the same angle.
Specifications
External dimensions | 577 mm (W) x 321 mm (H) x 380 mm (D) |
| [When using the support columns S] |
Weight | 10.8 kg (23.9 lbs) |
• The above specifications and exterior may be modified without prior notice to improve the product.
10
En
