Forward/Backward Angle of Inclination Adjustment Mechanism
On this stand, you can adjust the angle of inclination of the | 3 |
Pioneer television within a range of approximately 2° forward or backward according to your preference.
Ìi
•Be sure to adjust the angle only after you have attached the Pioneer television.
•Be sure to install it on a flat table or other flat surface.
•Be sure to hold the top of the Pioneer television with your hand while adjusting the angle.
Adjustment Procedure
1 Loosen the forward/backward inclination anchor bolts using the enclosed C wrench (2 locations on the left and right).
While being sure to hold the top of the Pioneer television with your hand, loosen the forward/backward inclination anchor bolts on the left and right sides by rotating them upwards using the enclosed C wrench.
'PSXBSECBDLXBSE | 4 |
JODMJOBUJPOBODIPSCPMU |
|
|
Tighten the forward/backward inclination anchor bolts (2 locations on the left and right).
Firmly tighten the forward/backward inclination anchor bolts on the left and right sides by rotating them downward using the enclosed C wrench.
Be sure to hold the top of the Pioneer television with your hand until you have fully tightened the bolts.
'PSXBSECBDLXBSE JODMJOBUJPOBODIPSCPMU
5JHIUFOJOH
Check once more to make sure that the forward/backward inclination anchor bolts are fully tightened.
2 Set the angle you prefer.
Set the angle you prefer by slowly moving the Pioneer television.
Ìi
While adjusting the angle, be very careful to keep your hands out of the place indicated by the arrow on the figure.
En
