Pioneer PDP-50MXE20 manual Speaker R terminal, Speaker L terminal, Audio Output Stereo mini jack

Connection panel (PDP-50MXE20/PDP-50MXE20-S)

The connection panel is provided with two video input terminals and one video output terminal. Audio input/ output and speaker output terminals are also provided.

Part Names and Functions

English

-=

IN	OUT
	OUTPUT INPUT1 INPUT2	INPUT1	INPUT2
	ANALOG RGB OUT	ANALOG RGB IN	DIGITAL RGB
	(D-Sub)	(D-Sub)	(DVI-D)

		COMBINATION	RS-232C	AUDIO AUDIO AUDIO
1	2	3	4	567	8	9	0

1SPEAKER (R) terminal

For connection of an external right speaker. Connect a speaker that has an impedance of 6 Ω.

2SPEAKER (L) terminal

For connection of an external left speaker. Connect a speaker that has an impedance of 6 Ω.

3COMBINATION IN/OUT

Never connect any component to these connectors without first consulting your Pioneer installation technician.

These connectors are used for Plasma Display setup adjustments.

4RS-232C

Never connect any component to this connector without first consulting your Pioneer installation technician.

This connector is used for Plasma Display setup adjustments.

5AUDIO (OUTPUT) (Stereo mini jack)

Use to output the audio of the selected source component connected to this unit to an AV amplifier or similar component.

Note: No sound is produced from the AUDIO (OUTPUT) jack when the MAIN POWER switch is set to OFF or ON (standby).

6AUDIO (INPUT1) (Stereo mini jack)

Use to obtain sound when INPUT1 is selected. Connect the audio output jack of components connected to INPUT1 to this unit.

7AUDIO (INPUT2) (Stereo mini jack)

Use to obtain sound when INPUT2 is selected. Connect the audio output jack of components connected to INPUT2 to this unit.

8ANALOG RGB OUT (INPUT1) (mini D-sub 15 pin) Use the ANALOG RGB OUT (INPUT1) terminal to output the video signal to an external monitor or other component.

Note: The video signal will not be output from the ANALOG RGB OUT (INPUT1) terminal when the main power of this unit is off or in standby mode.

9ANALOG RGB IN (INPUT1) (mini D-sub 15 pin) For connection of a personal computer (PC) or similar component. Make sure that the connection made corresponds to the format of the signal output from the connected component.

0DIGITAL RGB (INPUT2) (DVI-D jack) Use to connect a computer.

-AC IN

Use to connect the supplied power cord to an AC outlet.

=MAIN POWER switch

Use to switch the main power of the unit on and off.

7

En