Additional Information
English
Troubleshooting
What may at first seem to be an malfunction, may be remedied with a quick check.
Please check to see if a warning is displayed on the screen. If displayed, refer to the table below and check the mode. If there is no display check to see if the problem is listed on page 17. The problem may also be caused by something other than this unit so please also check the other components being used such as a video deck. If the problem can still not be solved please consult the dealer where this unit was purchased.
About the self diagnosis mode
Messages appear on the bottom of this unit’s screen to indicate operation or connection faults. After message confirmation, check the condition of the unit.
ERROR MESSAGE | REMEDY |
|
|
CAUTION | ¶ The current input signal is |
OUT OF RANGE | not supported by the unit. |
or | Check the Computer signal |
CAUTION | compatibility table and |
UNSUPPORTED SIGNAL | change the computer’s |
or | output signal setting |
SIGNAL NG | appropriately. |
|
|
WARNING | ¶ Turn off main power. |
THERMAL ALERT | ¶ Is ambient temperature |
SHUT DOWN | above 40 °C? |
| ¶ Remove any objects |
| blocking the cooling vents |
| on the Plasma Display. |
|
|
WARNING | ¶ Cooling fan has |
FAN FAILURE | malfunctioned. |
SHUT DOWN | Immediately turn off |
| power, remove power plug |
| from its outlet, and consult |
| a Pioneer service center or |
| your dealer. |
|
|
ERROR | ¶ An invalid operation has |
INVALID KEY ENTRY | been attempted. Check |
| input signals, connections |
| and other settings. |
|
|
SHUT DOWN | ¶ Turn off main power, wait |
| for 1 to 2 minutes, then try |
| turning power on again. If |
| problem persists, remove |
| power plug from its outlet |
| and consult a Pioneer |
| service center or your |
| dealer. |
|
|
16
En
