Part Names and Functions
Remote control unit
10
-
2
=
3~
4
!
5
6
@
7
#
8 
$
9
%
When handling the remote control unit
¶Do not drop the remote control unit or expose it to moisture.
¶Do not use the remote control unit in a location subject to direct sunlight, heat radiation from a heater, or in a place subject to excessive humidity.
¶When the remote control unit’s batteries begin to wear out, the operable distance will gradually become shorter. When this occurs, replace all batteries with new ones as soon as possible.
1SCREEN SIZE button
Press to select the screen size.
2INPUT buttons
Press to select the input.
3MENU button
Press to open and close the
4ADJUST (5/∞/3/2) buttons
Use to navigate menu screens and to adjust various settings on the unit.
5SET button
Press to adjust or enter various settings on the unit.
6SUB INPUT button
During
7SPLIT button
Press to switch to
8MUTING button
Press to mute the volume.
9ID NO. SET button
Button used by professional installers.
0AUTO SET UP button
When using computer signal input, automatically sets the [POSITION], [CLOCK] and [PHASE] to optimum values.
-STANDBY/ON button (
)
Press to put the unit in operation or standby mode.
=DISPLAY button
Press to view the unit’s current input and setup mode.
~POINT ZOOM button
Use to select and enlarge one part of the screen.
!FREEZE button
When memo screen function is enabled, a still image is displayed in the subscreen.
@SWAP button
English
During
#PIP SHIFT button
When using the
$VOLUME
%CLEAR button
Button used by professional installers.
5
En
