Pioneer PDP 42A3HD If you select PIP in the step, Upper left Upper right Bottom left Bottom right

06Basic Operations

4Select PIP/TWIN Mode and press the \ or OK button again.

5Press the c or d button to select the required option as follows, then press the [ or the BACK button.

Off - PIP - TWIN1 - TWIN2

PIP/TWIN

PIP/TWIN Mode	PIP	Off
PIP/TWIN Input	DIGITAL CH
		PIP
PIP Position		TWIN1

TWIN2

Move Enter Return

• If you set to Off, the following steps are not available.

6Press the c or d button to move to PIP/TWIN Input, then press the \ or OK button.

7Press the c or d button to select the required input source as follows, then press [ or the BACK button.

DIGITAL CH - ANALOG CH - VIDEO 1 - VIDEO 2 - VIDEO 3 - S-VIDEO 1 - S-VIDEO 2 - S-VIDEO 3 -

COMPONENT 1 - COMPONENT 2 - HDMI

PIP/TWIN			DIGITAL CH
PIP/TWIN Mode		PIP	ANALOG CH
PIP/TWIN Input		DIGITAL CH	VIDEO 1
PIP Position			VIDEO 2
			VIDEO 3
			S-VIDEO 1
			S-VIDEO 2
			S-VIDEO 3
			COMPONENT 1
			COMOPNENT 2
			HDMI
Move	Enter	Cancel

•You can select the modes by simply pressing the SPLIT button on the remote control.

•You can select the sources by simply pressing the SPLIT INPUT button on the remote control.

•In Twin or PIP mode, press the SWAP button to switch the position of the 2- screen shown.

22

If you select “PIP” in the step 5

You can select the position of picture in picture display.

Press the c or d button to move to PIP Position, then press the \ or OK button.

PIP/TWIN

PIP/TWIN Mode	PIP
PIP/TWIN Input	DIGITAL CH
PIP Position

Move Enter Return

(Upper left) (Upper right)

(Bottom left) (Bottom right)

•You can select the positions by simply pressing the SHIFT button on the remote control.

8Press the c or d button to select the required position for the sub-picture, then press the [ or BACK button.

9Press the EXIT button.

•You can turn off the sub-picture by simply pressing the EXIT button on the remote control.

•Multi screen function is available with the following combina- tions:

DIGITAL CH - ANALOG CH

DIGITAL CH/ANALOG CH - VIDEO1/2/3, S-VIDEO1/2/3, COMPONENT1/2 or HDMI

En