4¢
3
7
SKIP PLAY | SKIP ID |
SET CLEAR
×óBÀöù²/
COMPACT DISC RECORDER /
6 Finalizing and Erasing
OPEN/CLOSE
0
COMPACT DISC DIGITAL RECORDER
¦ | REC VOL |
6 7
PUSH ENTER
CD TEXT LegatoLinkConversion
Clearing skip IDs:
1Use the 4 and ¢ buttons (or the jog dial) to select the track you want
to clear the skip ID for.
Skip play must be off (the SKIP ON indicator does not light in the display) for you to choose tracks with skip IDs. Press SKIP PLAY on the remote to turn it off. The SKIP indicator lights if the track selected is marked with a skip ID.
2Press SKIP CLEAR.
The SKIP indicator starts to blink.
O2 SKIP CLR?
SKIP
•If the track you selected in step 2 above didn’t have a skip ID set, playback jumps to the next track that does.
•Use 4and ¢(or the jog dial) if you want to change the track again here.
•If there's no room left on the disc to clear a skip ID, the display will show the message SKIP FULL.
3Press SKIP CLEAR again to clear the
skip ID for the track playing.
The SKIP indicator disappears once the skip ID has been cleared.
• To cancel, press 6(or SKIP SET).
4Clear further skip IDs by repeating steps 1 to 3.
5When you're finished, press 7 to stop
the disc and press 0
Until you eject the disc, the recorder stores the skip ID information in its memory. On pressing 0, the recorder writes the skip ID information onto the disc.
Be careful: don’t switch off the unit before ejecting the
Playing a disc with skip IDs
If you're not sure whether a disc has skip IDs programmed, look for the SKIP ON indicator in the display when you load a
1Load a disc.
The SKIP ON indicator lights up if there are any skip IDs on the disc. This means the player won't play those tracks that are marked by skip IDs.
2Press SKIP PLAY to switch skip play on/off, then press 3 (6 on the
front panel).
When you turn off skip play, the player ignores the skip IDs and plays all tracks on the disc.
•If there were no skip IDs on the disc in the first place, the SKIP PLAY button has no effect.
35
En