Pioneer PDR-W839 Setting the balance, Recording Features, Prepare for recording, Enter, and Á

5 Recording Features

MENU/

DELETE

COMPACT DISC RECORDER / MULTI￿ -CD CHANGER ×óBÀöù²/

3-COMPACT DISC MULTI CHANGER

1 ENTER Á￿

CHECK

COMPACT DISC DIGITAL RECORDER

REC MODE	MENU/
	DELETE

¦￿ REC VOL

PUSH ENTER

CD TEXT LegatoLinkConversion

1 Prepare for recording		Setting the balance
		You can increase the relative volume of the right or left channel for
REC MODE must be pressed before going to step 2. See
		both recording and playback. However, It is generally not necessary
pages 20–23 for step-by-step recording instructions.
		to change the balance of a commercially recorded source.
2 Press CHECK to start the CD playing.
	1		Make sure the recorder is stopped,
The track/disc to be recorded starts playing and the SCAN			then press REC MODE.
indicator starts blinking.
			The recorder goes into record-pause.
3 Press the REC VOL. knob to adjust
	2		Press MENU/DELETE.
the current recording level.
You see the current setting. If the FIX indicator lights, it
		3 Turn the jog dial until BALANCE
means the fixed setting is on, and you cannot change the
			appears in the display, then press to
level. Press the REC VOL. knob again to turn it off.
Use the level meter to gauge the best recording level (the			ENTER.
loudest sounds in the source should reach no higher than
	4		Adjust the balance using the jog dial
the 0dB mark on the meter; the red segments in the level
meter should not light at all.			(1 and Á).
To fix the recording level at your setting, press the REC			You can adjust the balance from 0dB (default) to around
			-5dB in either direction.
VOL. knob again (the FIX indicator lights).To reset the
recording level to zero, hold down the REC VOL. knob for			• Pressing the jog dial (ENTER) and holding for 3 seconds
three seconds.			resets to center position.
4 When youÕre satisfied with the	5		Press the jog dial (ENTER) to confirm
recording level, press CHECK again.			the balance.

30

En