Pioneer Remix station, RMX-1000 Types of ISOLATE FX effects, CRUSH ECHO, SPIRAL DOWN, REVERB DOWN, ISOLATOR, CUT/ADD

	Frequency
SCENE FX control	Sets the cutoff frequency of the low pass filter.
SUB PARAMETER 1	Sets the echo sound’s delay time.
control
SUB PARAMETER 2	Applies a modulation effect to the output.
control

CRUSH ECHO

This function creates a sound as if the input sound were crushed and passes it through the filter and echo before outputting it.

The echo is output several times according to the multiplying factor of the input sound’s beat, with the delay sound gradually attenuating.

	Time
SCENE FX	Cycle

control

SCENE FX control	Sets the degree by which the input sound is crushed.
SUB PARAMETER 1	Sets the echo sound’s delay time.
control
SUB PARAMETER 2	Applies a modulation effect to the output.
control

SPIRAL DOWN

This function adds a reverberation effect to the input sound.

When the delay time is changed, the pitch changes simultaneously.

			Input sound turned off
			Fade-out
				Time
	1 beat
SCENE FX control		Sets the SPIRAL’s delay time.
SUB PARAMETER 1		Sets the echo sound’s delay time.
control
SUB PARAMETER 2		Sets the amount of pitch shifting by which the pitch is
control		decreased.

REVERB DOWN

This function adds a reverberation effect to the input sound.

Direct sound Early reflected sound

Level Reverberations

Time

SCENE FX control	Use this to set the degree of the reverb effect.
SUB PARAMETER 1	Use this to set the degree of the reverb effect.
control
SUB PARAMETER 2	Sets the cutoff frequency of the low pass filter.
control

Types of ISOLATE FX effects

ISOLATOR

This function allows you to split the input sound into three bands – low, mid, and high – and adjust the audio level for the respective bands.

LOW control	Adjusts the audio level of the low frequencies.	Types
MID control	Adjusts the audio level of the mid frequencies.
		of
HI control	Adjusts the audio level of the high frequencies.
		effects
CUT/ADD

CUT: When turned counterclockwise

This function allows you to adjust the audio level of the bass drum detected in the input sound and the manual filter’s cutoff frequency.

LOW control	Adjusts the audio level of the bass drum detected in the
	input sound.
MID control	Applies the sound other than the bass drum detected in
	the input sound to the high pass filter.
HI control	Applies the sound other than the bass drum detected in
	the input sound to the low pass filter.
	Bass drum
	Frequency
	Bass drum
	Bass drum

Bass drum

Bass drum

Bass drum

ADD: When turned clockwise

This function lets you apply a 1/8-beat delay sound according to the multiplying factor of the input sound’s beat.

LOW control	Adjusts the audio level of the low frequency delay sound.
MID control	Adjusts the audio level of the mid frequency delay sound.
HI control	Adjusts the audio level of the high frequency delay
	sound.
	1/1 beat	Time

1/2 beat

1/4 beat

1/8 beat

En 17