RELEASE FX section

1

2

3

1RELEASE FX selector switch

This switches the type of RELEASE FX effect.

2RELEASE FX lever

Use this to adjust the RELEASE FX effect.

3RELEASE FX indicator

This lights when the effect is turned on. It lights according to the position of the [RELEASE FX] lever.

Using the RELEASE FX function

1 Switch the [RELEASE FX] selector switch.

Select the RELEASE FX effect.

!For details on the types of effects, see Types of RELEASE FX effects on page 18.

2 Move the [RELEASE FX] lever towards you.

This turns the effect on.

The selected effect is applied to the sound selected in the FX SOURCE section.

!The effect changes according to the position of the lever.

!When the lever is moved back to its original position, the effect turns off. Any SCENE FX, ISOLATE FX or X-PAD FX effects that were on before are also turned off.

FX SOURCE section

1

2

1INPUT button

The sound input to this unit’s [INPUT] terminals is routed to this unit’s SCENE FX, ISOLATE FX and RELEASE FX sections.

2X-PAD button

The sound output from the X-PAD FX section is routed to this unit’s SCENE FX, ISOLATE FX and RELEASE FX sections.

Switching the audio signal path

Switch whether or not to route the sound input to this unit and the sound generated internally to this unit’s SCENE FX, ISOLATE FX and RELEASE FX sections.

Press the [INPUT] or [X-PAD] button.

The selected audio signal is input to this unit’s SCENE FX, ISOLATE FX and RELEASE FX sections.

!It is also possible to select the [INPUT] and [X-PAD] button simultaneously.

!The [NOISE] effect in the SCENE FX section is applied regardless of the status of the [INPUT] and [X-PAD] buttons.

FX SETTING section

1

Operation

1SETTING selector switch

This switches this unit’s effect parameter data between the [DEFAULT] and [USER] modes.

—[DEFAULT] mode: This unit can be used with the default param- eter data set upon shipment from the factory.

—[USER] mode: Parameter data created using remixbox can be loaded into this unit and used.

What you can do using remixbox

By using the “remixbox” application included with this unit, you can change the settings shown below.

!Effect parameters: The parameters of the different effects can be customized.

!Types of effects: The effect assigned to the [ROLL] in the X-PAD FX section can be changed to a different effect.

!Button sensitivity: The sensitivity of the [SCENE FX] and [ISOLATE FX] buttons can be adjusted.

!Management of sampled sound sources: Sampled sound sources loadable into this unit can be saved and managed.

For details, refer to the remixbox’ help menu.

For instructions on installing remixbox, see Using remixbox on page 20.

Using this unit in the USER mode

!Create the customized parameter data beforehand using remixbox.

!Upon shipment from the factory, the same parameter data as for the [DEFAULT] mode is set for the [USER] mode.

Writing the customized parameter data from remixbox into this unit

1Connect the computer on which remixbox is installed to this unit by USB cable.

2Send the customized parameter data from remixbox to this unit.

3Slide the [SETTING] selector switch to the [USER] position.

Loading customized parameter data stored on an SD memory card

1Store the customized parameter data on the SD memory card using remixbox.

2Insert the SD memory card used in step 1 into this unit’s SD memory card slot.

3Slide the [SETTING] selector switch to the [USER] position.

!Customized parameter data stored on an SD memory card is reflected on this unit simply by inserting that SD memory card into this unit.

En 15