Pioneer Remix station, RMX-1000 Types of effects, Types of SCENE FX effects, BPF ECHO, ECHO, NOISE, SPIRAL UP, REVERB UP, HPF ECHO, LPF ECHO

Types of effects

Types of SCENE FX effects

BPF ECHO

This function superimposes the input sound that has passed through the band pass filter onto the original input sound and passes this through the echo circuit before outputting the sound.

The echo is output several times according to the multiplying factor of the input sound’s beat, with the delay sound gradually attenuating.

Input sound that has passed

through the band pass filter

		Input sound
	SCENE FX	Frequency
	SCENE FX
	control
	SCENE FX control	Sets the band pass filter’s cutoff frequency.
	SUB PARAMETER 1	Sets the echo sound’s delay time.
	control	Sets the echo sound’s delay time.
	control
	SUB PARAMETER 2	Applies a modulation effect to the output.
	control	Applies a modulation effect to the output.
	control

ECHO

The echo is output several times according to the multiplying factor of the input sound’s beat, with the delay sound gradually attenuating.

Input sound turned off

		Fade-out
			Time

	1 beat
	1 beat

SCENE FX control		Use this to set the balance between the original sound
SCENE FX control		and the echo sound.
		and the echo sound.
SUB PARAMETER 1		Sets the echo sound’s delay time.
control		Sets the echo sound’s delay time.
control
SUB PARAMETER 2		Sets the filter’s cut-off frequency.
control		Sets the filter’s cut-off frequency.
control

NOISE

This function passes white noise generated internally through the band pass filter and echo before outputting it.

	SCENE FX	Frequency
	SCENE FX
	control
	SCENE FX control	Sets the cutoff frequency of the filter through which the
	SCENE FX control	white noise passes.
		white noise passes.
	SUB PARAMETER 1	Sets the volume of the white noise.
	control	Sets the volume of the white noise.
	control
	SUB PARAMETER 2	Applies a modulation effect to the white noise.
	control	Applies a modulation effect to the white noise.
	control

SPIRAL UP

This function adds a reverberation effect to the input sound.

When the delay time is changed, the pitch changes simultaneously.

			Input sound turned off
			Fade-out
				Time
	1 beat



SCENE FX control		Sets the SPIRAL’s delay time.

SUB PARAMETER 1		Sets the echo sound’s delay time.
control		Sets the echo sound’s delay time.
control

SUB PARAMETER 2		Sets the amount of pitch shifting by which the pitch is
control		raised.

REVERB UP

This function adds a reverberation effect to the input sound.

Direct sound Early reflected sound

Level	Reverberations

Time

	SCENE FX control	Use this to set the degree of the reverb effect.
	SUB PARAMETER 1	Use this to set the degree of the reverb effect.
	control	Use this to set the degree of the reverb effect.
	control
	SUB PARAMETER 2	Sets the cutoff frequency of the high pass filter.
	control	Sets the cutoff frequency of the high pass filter.
	control

HPF ECHO

This function passes the input sound through the high pass filter and echo before outputting it.

The echo is output several times according to the multiplying factor of the input sound’s beat, with the delay sound gradually attenuating.

		Frequency

	SCENE FX control	Sets the cutoff frequency of the high pass filter.

	SUB PARAMETER 1	Sets the echo sound’s delay time.
	control	Sets the echo sound’s delay time.
	control

	SUB PARAMETER 2	Applies a modulation effect to the output.
	control	Applies a modulation effect to the output.
	control

LPF ECHO

This function passes the input sound through the low pass filter and echo before outputting it.

The echo is output several times according to the multiplying factor of the input sound’s beat, with the delay sound gradually attenuating.

16En