Additional information

Troubleshooting

!Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

!The player may not operate properly due to static electricity or other external influences. In such cases, normal operation may be restored by unplugging the power cord then plugging it back in.

Problem

Check

Remedy

The power is not turned on.

Are the included power cord and AC adapter

Properly connect the included power cord to a power outlet.

 

properly connected?

Properly connect the power cord to the included AC adapter. (page 7)

 

 

 

 

 

Connect the included AC adapter’s DC plug properly to this unit.

 

Is the [ON, STANDBY] switch for power supply

Set the [ON, STANDBY] switch for power supply to [ON].

 

set to [ON]?

 

 

 

 

No sound or small sound.

Are the connection cables properly connected?

Connect the connection cables properly. (page 7)

 

 

 

 

Are the terminals and plugs dirty?

Clean the terminals and plugs before making connections.

 

Is the [CONNECTION] selector switch on the rear

Switch the [CONNECTION] selector switch according to the connected device.

 

panel of this unit properly set?

(page 11)

 

 

 

Distorted sound.

Is the audio level output from the [OUTPUT]

Adjust the [OUTPUT LEVEL] control so that the [OUTPUT] level indicator lights

 

terminals appropriately set?

up to about [0 dB] at the peak level. (Page 11)

 

 

 

 

Is the audio level input to the [INPUT] terminals

Adjust the [INPUT LEVEL] control so that the [INPUT] level indicator lights up to

 

appropriately set?

about [0 dB] at the peak level. (page 11)

 

 

 

Tempo (BPM) cannot be measured or

Is the audio input level too high or too low?

Adjust the [INPUT LEVEL] control so that the [INPUT] level indicator lights up to

measurement value of tempo (BPM) is

 

about [0 dB] at the peak level. (page 11)

implausible.

 

 

 

For some tracks, it may not be possible to measure the tempo (BPM). Use the

 

 

 

 

[TAP] button to input the tempo manually. (page 12)

 

 

 

Value of the measured tempo (BPM)

—

The values may differ slightly due to the different ways in which the BPM is

differs from value recorded on CD, or

 

measured.

tempo (BPM) values displayed on DJ

 

 

player, DJ mixer, DJ software and this

 

 

unit differ.

 

 

 

 

 

This unit is not recognized after it has

Is the included USB cable properly connected?

Connect this unit and computer directly, not via a USB hub.

been connected to a computer.

 

 

 

 

 

SD memory card is not recognized.

Is the SD memory card properly inserted?

Insert the SD memory card securely all the way in. (Page 13)

 

 

SD memory cards have a front and back. Be sure to insert them in the proper

 

 

direction.

 

 

 

 

Is the SD memory card one that is usable on this

Only SD memory cards or SDHC memory cards can be used on this unit. Some

 

unit?

cards may not be usable.

 

 

 

Much time is required to load data

Are there a large number of folders or files

When there are many folders or files, some time may be required for loading.

from an SD memory card.

recorded on the SD memory card?

 

 

 

 

 

Have you stored files other than setting files and

If the folder contains files other than setting files and sampled data, some time

 

sampled data on the SD memory card?

will be required for loading. Do not put files other than setting files and sampled

 

 

data in the folder.

 

 

 

Effects are not applied.

Is the [INPUT] or [X-PAD] button lit?

Press the [INPUT] or [X-PAD] button. (Page 15)

ISOLATE FX effects are not applied.

Is the [ISOLATE FX] control set to an appropriate

Turn the [ISOLATE FX] control clockwise or counterclockwise. (Page 13)

 

position?

 

X-PAD FX effects are not applied.

Is the [X-PAD LEVEL] control set to an appropriate

Turn the [X-PAD LEVEL] control clockwise. (Page 13)

 

position?

 

SCENE FX effects are not applied.

Is the [SCENE FX] control set to an appropriate

Turn the [SCENE FX] control clockwise. (Page 12)

 

position?

 

MIDI sequencer does not synchronize.

Is the MIDI sequencer’s sync mode set to Slave?

Set the MIDI sequencer’s sync mode to Slave.

 

 

 

 

Does the MIDI sequencer you are using support

MIDI sequencers not supporting MIDI timing clocks cannot be synchronized.

 

MIDI timing clocks?

 

 

 

 

MIDI control does not work.

Are the MIDI settings properly set?

To operate DJ software with this unit, this unit’s MIDI messages must be

 

 

assigned to the DJ software you are using. For instructions on assigning mes-

 

 

sages, see your DJ software’s operating instructions.

 

 

 

information Additional

En 25