13Additional information
HDMI
Symptom | Remedy |
The HDMI indicator blinks | • Check all the points below. |
continuously. |
|
|
|
No picture or sound. | • This receiver is |
| compatible. If they are not, please connect them using the component or composite video jacks. |
| • Depending on the connected source component, it’s possible that it will not work with this receiver |
| (even if it is |
| between source and receiver. |
| • If the problem still persists when connecting your HDMI component directly to your monitor, |
| please consult the component or monitor manual or contact the manufacturer for support. |
| • If video images do not appear on your TV or flat panel TV, try adjusting the resolution, DeepColor |
| or other setting for your component. |
| • If ‘NOT SUPPORT’ appears in the receiver’s display, try adjusting the resolution, DeepColor or |
| other setting for your component. |
| • While analog video signals are being output over HDMI, use a separate connection for audio |
| output. |
| • When this receiver reproduces MULTI CH IN audio sources with the HDMI setting set to |
| THROUGH, you cannot hear audio output from all channels. In this case, make a digital or analog |
| audio connection. |
| • To output signals in DeepColor, use an HDMI cable (high speed HDMI cable) to connect this |
| receiver to a component or TV with the DeepColor feature. |
|
|
No picture. | • Try changing the Resolution setting (in Setting the Video options on page 72). |
|
|
No sound, or sound suddenly | • Check that the HDMI AV setting is set to AMP/THROUGH. |
ceases. | • If the component is a DVI device, use a separate connection for the audio. |
| • If analog video is being output over HDMI, please use a separate connection for the audio. |
| • Check the audio output settings of the source component. |
|
|
Noisy or distorted picture. | • Sometimes a video deck may output a noisy video signal (during scanning, for example), or the |
| video quality may just be poor (with some video game units, for example). The picture quality may |
| also depend on the settings, etc. of your display device. Switch off the video converter and reconnect |
| the source and display device using the same type of connection (component or composite), then |
| start playback again. |
| • If the problem still persists when connecting your HDMI component directly to your monitor, |
| please consult the component or monitor manual or contact the manufacturer for support. |
|
|
HDCP ERROR shows in the | • Check whether or not the connected component is compatible with HDCP. If it is not compatible |
display. | with HDCP, reconnect the source device using a different type of connection (component or |
| composite). Some components that are compatible with HDCP still cause this message to be |
| displayed, but so long as there is no problem with displaying video, this is not a malfunction. |
|
|
86
En
