Changing temporary settings into new default settings
The following menus revert to default settings after two minutes of inactivity or after the printer is turned off:
Copy menu
Scan menu
Fax menu (selected models only)
Photo menu
•Copies
•Quality
•Lighter/Darker
•Resize
•Original Size
•Pages per Sheet
•Copies per Sheet
•Content Type
•Quality
•Original Size
•Lighter/Darker
•Quality
The following Photo options will not time out after two minutes of inactivity or after you turn off the printer, but they will return to the factory default settings when a memory card or flash drive is removed.
•Photo Effects
•Photo Size
•Layout
•Quality
To change the temporary settings into new default settings
1From the printer control panel, press .
2Press the arrow buttons to scroll to Defaults, and then press .
3Press the arrow buttons to scroll to Set Defaults, and then press .
Use Current appears on the display.
4Press again to select Use Current.
5Press until you exit Setup, or press another mode button.
To disable the settings timeout feature
You can disable the settings timeout feature if you do not want the printer to revert to the default settings after two minutes of inactivity or after the printer is turned off.
1From the printer control panel, press .
2Press the arrow buttons to scroll to Device Setup, and then press .
3Press the arrow buttons to scroll to Clear Settings Timeout, and then press .
Using the printer control panel buttons and menus
20