4Press the arrow bu ttons to scroll t o Never, and then press .
5Press until you exit Setup, or press another mode button.
Changing the Power Saver timeout
The Power Saver timeout is the time it takes for the printer to switch to Power Saver mode when the printer is left
idle. The Power Saver feature optimizes energy ef ficiency by reducing the printer power consump tion (as much as
28 percent on some printer models) compared to th e default printer settings. To save the most en ergy, select the
lowest Power Saver timeout.
1From the printer control panel, press .
2Press the arrow bu ttons to scroll t o Device Setup, and then press .
3Press the arrow bu ttons to scroll t o Power Saver, and then press .
4Press the arrow button s to select a Power Saver timeou t, and then press .
5Press until you exit Setup, or press another mode button.
Resetting to factory settings
Resetting to factory default settings will delete all the printer settings you have previously selected.

Using the printer control panel men us

1From the printer control panel, press .
2Press the arrow bu ttons to scroll t o Defaults, and then press .
3Press the arrow bu ttons to scroll t o Set Defaults, and then press .
4Press the arrow bu ttons to scroll t o Use Factory, and then press .
5When prompted to set the initia l settings of your printer, mak e your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.

Using a button combination (if you c annot read the current

language)

1Turn off the printer.
Note: If you have set the Power Saver timeout in the Setup menu, then press and hold the for three seconds
to turn off the p rinter.
2From the printer control panel, press and hold and , a nd then press to turn the printer on.
3Release all three buttons.
4When prompted to set the initia l settings of your printer, mak e your selections using the printer control panel
buttons.
Initial Setup Complete appears on the display.
Using the printer con trol panel buttons and menus
21