3From the printer control panel, press .
4Press until Photo Reprin t appears.
5Press the arrow bu ttons to scroll t o Yes, and then press .
6Press the arrow buttons to select the desired paper size, and then press .
7Press .
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking , displaying, or storin g.
Enlarging or reducing images
1Load paper.
2Load an original document facedown on the scanner gl ass.
3From the printer control panel, press .
4Press until Resize appears .
5Press the arrow bu ttons until the setting that you w ant appears.
Notes:
•If you select Custom % Resize, then press , and then press the arrow buttons to select the desired custom
percent value. Press to sa ve the setting.
•If you select Borderless, then the printer will reduce or en large the document or photo as necessary to print
a borderless copy on the paper size that you selected. For best results with this resize setting, use photo
paper and set the paper type to Photo, or let the printer automatically detect the paper type.
6Press .
Note: After the copy job is finished, press to reset the settings to the default. The resize setting also switches to
100% after two minutes of printer inactivity.
Adjusting copy quality
1Load paper.
2Load an original document faceup into the ADF or fac edown on the scanner glass .
3From the printer control panel, press .
4Press until Quality appears.
5Press the arrow buttons to set the copy quality to Automatic, Draft, Normal, or Photo, and then press to save
your setting.
6Press .
Copying
48