5Press the arrow buttons to select the paper size, paper type, photo size, and layout of the photos that you wan t
to print. Press each time you make a selection.
6See the documentation for your camera to begin printing.
Note: If you insert the camera while the printer is perfor ming another job, then wait for the job to fi nish before
printing from the camera.
Printing photos from a memory de vice using the proof sheet
1Load letter- or A4-size plain paper.
2From the printer control panel, press .
3Insert a memory card or flash drive .
4Press the arrow bu ttons to scroll t o Proof Sheet, and then press .
5Press the arrow bu ttons to select an option to pri nt a proof sheet.
You can print a proof sheet:
•For all photos on the memory device.
•For the 20 most recent photos, if t here are 20 or more photos on the m emory device.
•By date, if the photos on the card were taken on different dates. If you choose this option, then press the arrow
buttons to set the start and end dates, and then press to save your selections.
6Press .
The proof sheet prints.
7Follow the instructions on the proof sheet to select which photos to print, the number of copies per photo, re d-eye
reduction, page layout, print options, and paper size.
Note: When making selections, make sure to fill in the circles completely.
8Load the proof sheet facedown on the scanner glass.
Scan Proof Sheet appears on the display.
Note: If this option does not appear on the display, then press the arrow buttons until it appears on the display.
9Press .
The printer scans the proof sheet.
10 Load photo paper with the glossy or print able side faceup. (If you are not sure which s ide is the printable side,
then see the instructions that came with the paper.)
Note: Make sure that the paper matches the size that you selected on the proof sheet.
11 Press the Color/Black button to set a color or black-and-white print.
When you select color or black-only printing, the light near your choice comes on.
12 Press to print the p hotos.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individuall y from the paper exit tray, and then allow the prin ts to dry at least
24 hours before stacking, di splaying, or storing.
Printing
40