Scenario 4: Digital telephone serv ice through a cable provider

Setup 1: Printer is connect ed directly to a cable modem

Follow this setup if you normally connect your telephone to a cable modem.
Tips for this setup:
•Connect the printer to the port labeled Phone Line 1 or Phone Port on the cable modem. The port labeled
Phone Line 2 or Fax Port is not always active. You may need to pay extra to your cable provider if y ou want to
activate the second phone port.
•To make sure that the phone port on the cabl e modem is active, plug an analog telephone into th e phone port,
and then listen for a dial t one. If you hear a dial tone, t hen the port is active.
•If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer into the
second phone port. You can use a phon e splitter. Plug the phone splitter into the Phone Line 1 or Phone
Port , and then plug the printer and telephone into the splitter.
Note: Make sure you use a phone spli tter, not a line splitter. To make sure that you are using the correct splitter,
plug an analog telephone into the splitter and then listen for a dial tone .
Faxing
62