Printing photos from a PictBridge-enabled digital camera

PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without using a computer.

1Insert one end of the USB cable into the camera.

Note: Use only the USB cable that came with the camera.

2Insert the other end of the cable into the PictBridge port on the front of the printer.

Notes:

Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB selection is incorrect, then the camera is detected as a flash drive, or an error message will be displayed on the printer control panel. For more information, see the camera documentation.

The printer reads only one memory device at a time.

Warning—Potential Damage: Do not touch the USB cable, any network adapter, any connector, or the printer in the area shown while actively printing from a PictBridge-enabled digital camera. A loss of data can occur.

3If the PictBridge connection is successful, then the following message appears on the display: PictBridge

Camera detected. Press OK to change settings.

4Press to access the PictBridge menu.

Printing

39

Page 39
Image 39
Dell 4443, V515W Printing photos from a PictBridge-enabled digital camera, Camera detected. Press OK to change settings