Delta Electronics 115V Series, 230V Series, 460V Series manual Summary of Parameter Settings

Chapter 5 ParametersVFD-S Series

5.1 Summary of Parameter Settings

: The parameter can be set during operation.

Group 0 User Parameters

Pr.	Explanation	Settings	Factory	NOTE
			Setting
0-00	Identity Code of the AC Motor Drive	Read-only	d #
0-01	Rated Current Display of the AC	Read-only	d##.#
	Motor Drive
0-02	Parameter Reset	d09: All parameters are reset to	d0
		factory settings (50Hz,
		220V/380V)
		d10: All parameters are reset to
		factory settings (60Hz,
		220V/440V)
		d0: Display the frequency command
		value (LED F)
		d1: Display the actual output
		frequency (LED H)
0-03	Start-up Display Selection	d2: Multifunction display, see Pr.00-	d0
		04
		d3: Display output current (LED A)
		d4: Display forward/reverse
		command (Frd/rEv)
		d0: Display User-Defined Unit (u)
		d1: Display Counter Value (C)
		d2: Display Process Operation (1.tt)
0-04	Content of Multi-Function Display	d3: Display DC-BUS Voltage (u )	d0
		d4: Display output voltage (E)
		d5: Display frequency commands of
		PID (P)
		d6: Display analog feedback signal
		value (b) (%)
0-05	User-Defined Coefficient K	d0.1 to d160	d1.0
0-06	Software Version	Read-only	d#.#
0-07	Password Input	d0 to d999	d0
0-08	Password Set	d0 to d999	d0
0-09	Memory Mode Selections	d0 to d63	d8
Group 1 Basic Parameters
Pr.	Explanation	Settings	Factory	NOTE
			Setting
1-00	Maximum Output Frequency (Fmax)	d50.0 to d400 Hz	d60.0
1-01	Maximum Voltage Frequency (Fbase)	d10.0 to d400 Hz	d60.0
1-02	Maximum Output Voltage (Vmax)	230V series: d2.0V to d255V	d220
		460V series: d4.0V to d510V	d440
1-03	Mid-Point Frequency (Fmid)	d1.0 to d400 Hz	d1.0
1-04	Mid-Point Voltage (Vmid)	230V series: d2.0V to d255V	d12

5-2 Revision August 2006, SE08, SW V2.61