Delta Electronics 115V Series, 230V Series, 460V Series manual Saddle on both ends Saddle on one end

Appendix B AccessoriesVFD-S Series

1.Use the cable with shielding (double shielding is the best).

2.The shielding on both ends of the motor cable should be grounded with the minimum length and maximum contact area.

3.Remove any paint on metal saddle for good ground contact with the plate and shielding.

Remove any paint on metal saddle for good ground contact with the plate and shielding.

saddle the plate with grounding

Saddle on both ends

Saddle on one end

B-4 Revision August 2006, SE08, SW V2.61