Delta Electronics 460V Series, 230V Series, 115V Series manual Start UpVFD-S Series

Chapter 3 Start UpVFD-S Series

NOTE

1.Stop running immediately if any fault occurs and refer to the troubleshooting guide for solving the problem.

2.Do NOT touch output terminals U/T1, V/T2, W/T3 when power is still applied to R/L1, S/L2, T/L3 even when the AC motor drive has stopped. The DC-link capacitors may still be charged to hazardous voltage levels, even if the power has been turned off.

3.To avoid damage to components, do not touch them or the circuit boards with metal objects or your bare hands.

Revision August 2006, SE08, SW V2.61 3-3