Delta Electronics 230V Series, 460V Series Group 7 Motor Parameters Explanation Settings Factory

Chapter 5 ParametersVFD-S Series

Group 7 Motor Parameters

Pr.	Explanation	Settings	Factory	NOTE
			Setting
7-00	Motor Rated Current	d30 to d120%	d85
7-01	Motor No-Load Current	d0 to d90%	d50
7-02	Torque Compensation	d0 to d10	d1
7-03	Slip Compensation	d0.0 to d10.0	d0.0
Group 8 Special Parameters
Pr.	Explanation	Settings	Factory	NOTE
			Setting
8-00	DC Braking Voltage Level	d0 to d30%	d0
8-01	DC Braking Time during Start-Up	d0.0 to d60.0 Sec	d0.0
8-02	DC Braking time during Stopping	d0.0 to d60.0 Sec	d0.0
8-03	Start-Point for DC Braking	d0.0 to d400 Hz	d0.0
		d0: Operation stops after
		Momentary Power Loss
		d1: Operation continues after
	Momentary Power Loss Operation	momentary power loss, speed
8-04		search starts with the Master	d0
	Selection	Frequency reference value
		d2: Operation continues after
		momentary power loss, speed
		search starts with the minimum
		frequency
8-05	Maximum Allowable Power Loss Time	d0.3 to d5.0 Sec	d2.0
8-06	B.B. Time for Speed Search	d0.3 to d5.0 Sec	d0.5
8-07	Current Limit for Speed Search	d30 to d200%	d150
8-08	Skip Frequency 1 Upper Limit	d0.0 to d400 Hz	d0.0
8-09	Skip Frequency 1 Lower Limit	d0.0 to d400 Hz	d0.0
8-10	Skip Frequency 2 Upper Limit	d0.0 to d400 Hz	d0.0
8-11	Skip Frequency 2 Lower Limit	d0.0 to d400 Hz	d0.0
8-12	Skip Frequency 3 Upper Limit	d0.0 to d400 Hz	d0.0
8-13	Skip Frequency 3 Lower Limit	d0.0 to d400 Hz	d0.0
8-14	Auto Restart After Fault	d0 to d10	d0
8-15	AVR Function	d0: Enable	d2
		d1: Disable
		d2: Disable when deceleration
8-16	Software Braking Level	115V/230V series: d350 to d450V	d380
		460V series: d700 to d900V	d760
8-17	DC Braking Lower Bound Limit	d0.0 to d400 Hz	d0.0

Group 9 Communication Parameters

Revision August 2006, SE08, SW V2.61 5-9