Delta Electronics 115V Series, 230V Series manual 00Communication Address Settings D1 to d254

Chapter 5 ParametersVFD-S Series

Group 9: Communication Parameters

9-00Communication Address

Settings d1 to d254 Factory Setting: d1

If the AC drive is controlled by RS-485 serial communication, the communication address must be set via this parameter.

RS485

Computer

d1 d2

d3

			S1	S1	S1
9-01	Transmission Speed
					Factory Setting: d1
	Settings	d0	Baud rate 4800 bps (bits / second)
		d1	Baud rate 9600 bps
		d2	Baud rate 19200 bps
		d3	Baud rate 38400 bps

Users can set parameters and control the operation of the AC drive via the RS-485 serial

interface of a personal computer. This parameter is used to set the transmission speed

between the computer and AC drive.

9-02Transmission Fault Treatment

Factory Setting: d0

Settings	d0	Warn and keep operating
	d1	Warn and RAMP to stop
	d2	Warn and COAST to stop
	d3	No warning and keep operating

5-62 Revision August 2006, SE08, SW V2.61