Delta Electronics 115V Series, 230V Series, 460V Series manual End

Chapter 5 ParametersVFD-S Series

0-08

0-07

Displays 0 when
	Correct Password
entering correct
password into		END
Pr.0-07.
		0-	08
	Displays		0 when
	entering correct
	password into
	Pr.0-07.

Incorrect Password

END

0-07

3 chances to enter the correct password.

1st time displays "d 1" if password is incorrect. 2nd time displays "d 2", if password is incorrect. 3rd time displays " codE" (blinking)

If the password was entered incorrectly after three tries, the keypad will be locked.

Turn the power OFF/ON to re-enter the password.

0-09	Memory Mode Selections		Unit: 1
	Settings	d0 to d63	Factory Setting: d8

This parameter is determined to save frequency, operation direction and parameter setting

after power off or not.

Setting method: input to this parameter after converting binary 6-bit to decimal. Refer to

following two tables for detail.

Bit 0	Reserved
Bit 1	0: save frequency
	1: not save frequency
Bit 2	Reserved
Bit 3	0: save direction
	1: not save direction
Bit 4	0: save parameters (except Pr.0-09 and Pr.0-02)
	1: not save parameters
Bit 5	0: save Pr.0-09
	1: not save Pr. 0-09

5-20 Revision August 2006, SE08, SW V2.61