Delta Electronics 115V Series, 230V Series, 460V Series manual Description of Parameter Settings

			Chapter 5 ParametersVFD-S Series
5.3 Description of Parameter Settings
Group 0: User Parameters			This parameter can be set during operation.
0-00	Identity Code of the AC Motor Drive
	Settings	Read Only		Factory setting: d#
0-01	Rated Current Display of the AC motor drive
	Settings	Read Only		Factory setting: d ##.#

Pr. 0-00 displays the identity code of the AC motor drive. The capacity, rated current, rated

voltage and the max. carrier frequency relate to the identity code. Users can use the following

table to check how the rated current, rated voltage and max. carrier frequency of the AC

motor drive correspond to the identity code.

Pr. 0-01 displays the rated current of the AC motor drive. By reading this parameter the user

can check if the AC motor drive is correct.

			115V/230V Series			0.75
	KW		0.2	0.4				1.5		2.2
	HP		0.25	0.5		1.0		2.0		3.0
	Pr.0-00		d0		d2	d4		d6		d8
	Rated Output Current (A)		1.6	2.5		4.2		7.5		11.0
	Max. Carrier Frequency					10kHz
			460V Series
	KW		0.4		0.75		1.5		2.2
	HP		0.5		1.0		2.0		3.0
	Pr.0-00		d3		d5		d7			d9
	Rated Output Current (A)		1.5		2.5		4.2		5.5
	Max. Carrier Frequency					10kHz
0-02	Parameter Reset
									Factory Setting: d0
	Settings d9	All parameters are reset to factory settings (50Hz, 220V/380V)
	d10	All parameters are reset to factory settings (60Hz, 220V/440V)

This setting allows the user to return all parameters to the factory default settings.

0-03Start-up Display Selection

Factory Setting: d0

Settings d0 Display the frequency command value (LED F) d1 Display the actual output frequency (LED H)

d2 Multifunction display, see Pr.0-04

d3 Display output current (LED A)

Revision August 2006, SE08, SW V2.61 5-17