Delta Electronics 460V Series, 230V Series, 115V Series manual Storage

Chapter 1 IntroductionVFD-S Series

SCREW

DIVISION

PLATE

Reinstall Division Plate.

Screw Torque: 5 to 6 kgf-cm (4.3 to 5.2 in-lbf)

CONDUIT

BRACKET SCREW

SCREW

Install Conduit Bracket cover and tighten screws.

1.4 Storage

The AC motor drive should be kept in the shipping carton or crate before installation. In order to retain the warranty coverage, the AC motor drive should be stored properly when it is not to be used for an extended period of time. Storage conditions are:

Store in a clean and dry location free from direct sunlight or corrosive fumes. Store within an ambient temperature range of -20 °C to +60 °C.

Store within a relative humidity range of 0% to 90% and non-condensing environment. Store within an air pressure range of 86kPa to 106kPa.

CAUTION!

1.DO NOT store in an area with rapid changes in temperature. It may cause condensation and frost.

2.DO NOT place on the ground directly. It should be stored properly. Moreover, if the surrounding environment is humid, you should put exsiccator in the package.

1-4 Revision August 2006, SE08, SW V2.61