AIR SOFT
Preset List
Is accessed by clicking on the left side of the display frame.
Presets include |
|
| |
• | Preset Volume | • | Mute status |
• | Bass Management | • | |
• LFE Low Pass | • LFE Gain | ||
•Parametric EQ
(can be adjusted using the AIR PC IP only)
All other settings can be considered “global” and are not stored with presets.
Recall presets
Select preset using your mouse and press Recall.
Store presets
Select User preset locations 1 to 15 and press Store.
Edit Name
Any User preset can be renamed.
Set cursor in the name field and edit name using your keyboard.
Locked symbol in Preset List
The “locked symbol” illustrated above indicates that the preset have been locked via the AIR
OK
Press OK to exit window.
Network
Accessing the Network Screen
Press the (((•))) icon in the Main screen to access the Network facilities. In this screen various global network settings are handled.
Autodetect
Press to let the AIR SOFT scan your COM ports. If an AIR System is connected to any port it will be recognized. Please note that the Autodetect function is not executed until OK is pressed.
Port
Manual select of Serial/COM port.
Status
Indicates the status when entering the Network screen.
Clear Network - Clear Setup for entire network Select this reset procedure to clear all tasks and setup settings.
Clear Settings - Clear Monitor Settings
All global and local parameters in connected monitors are reset. Preset and network settings are not affected.
Reset to Factory Settings - Reset All Settings
A “factory” reset procedure that deletes all global and local parameter settings as well as preset and network settings.
Upload Software to Monitors
Software updates for the AIR System comes as a .syx - file. There are separate files for monitors and subs.
•Save the .syx - file to a location on your harddrive prior to the upload procedure.
•Press Upload Software to Monitors
•Follow the instructions
48
