SETUPS
To set a Master monitor as System Controller the TC Link button on the rear panel MUST be in
5.1 Digital Setup
This illustration shows how to connect a 5.1 digital setup
•Left monitor is set as System Controller by leaving out the TC Link button on the rear panel.
•Left monitor receives both Left and Right Input signal. Right channel is fed via the TC
•LS monitor receives both Left and Right Surround channels. The RS channel is fed via the
•Center monitor receives both Center and LFE channels. The LFE monitor is fed via the
•The Remote, AIR Soft and AIR
To set a Master monitor as System Controller the TC Link button on the rear panel MUST be in
5.1 Analog Setup
This illustration shows how to connect a 5.1 analog setup
•Left monitor is set as System Controller by leaving out the TC Link button on the rear panel.
•Left monitor receives both Left and Right Input signal. Right channel is fed via the TC
•LS monitor receives both Left and Right Surround channels. The RS channel is fed via the
•Center monitor receives both Center and LFE channels. The LFE monitor is fed via the
•With no
•With
•The Remote, AIR Soft and AIR
The setups will ONLY operate correctly if connected according to the illustrations!
8