Pioneer VSX-1022-K, VSX-822-K manual 41

6						Playback with NETWORK features
			DHCP server function. Before you set up the network, consult			If there is no DHCP server on the network and you select
The Network Setup menu			with your ISP or the network manager for the required			ON, this receiver will use its own Auto IP function to
Setting up the network to listen to Internet radio on this			settings. It is advised that you also refer to the operation			determine the IP address.
receiver.			manual supplied with your network component.			• The IP address determined by the Auto IP function is
			• IP Address			169.254.X.X. You cannot listen to an Internet radio
	Press NETWORK repeatedly to switch the receiver to
			The IP address to be entered must be defined within the			station if the IP address is set for the Auto IP function.
1 NETRADIO input.
			following ranges. If the IP address defined is beyond the		4
2						Enter the IP Address, Subnet Mask, Default Gateway,
	Press HOME MENU.		following ranges, you cannot play back audio files stored on
						Primary DNS Server and Secondary DNS Server.
	Network Setup menu appears on your TV. Use ///		components on the network or listen to Internet radio			Press / to select a number and / to move the
	 and ENTER on the remote control to navigate through		stations.
						cursor.
			Class A: 10.0.0.1 to 10.255.255.254
	the screens and select menu items. Press RETURN to
					5
	exit the current menu.		Class B: 172.16.0.1 to 172.31.255.254			Select ‘OFF’ or ‘ON’ for the Enable Proxy Server setting
	• Press HOME MENU at any time to exit the Network		Class C: 192.168.0.1 to 192.168.255.254			to deactivate or activate the proxy server.
		Setup menu.	• Subnet Mask			In case you select OFF, proceed with Step 8. In case you
3			In case an xDSL modem or a terminal adapter is directly			select ON, on the other hand, proceed with Step 6.
	Select the setting you want to adjust.
			connected to this receiver, enter the subnet mask provided
						Enter the address of your proxy server or the domain
	• Network Configuration
		- IP Address, Proxy – Sets up the IP address/Proxy of	by your ISP on paper. In most cases, enter 255.255.255.0.		6 name.
			• Default Gateway			Use / to select a character, / to set the position,
		this receiver (see below).
			In case a gateway (router) is connected to this receiver,
		- Friendly Name – The name of the receiver displayed				and ENTER to confirm your selection.
			enter the corresponding IP address.
					7
		on a computer or other device connected to the
			• Primary DNS Server/Secondary DNS Server			Enter the port number of your proxy server.
		network can be changed (see below).
			In case there is only one DNS server address provided by			Use / to select a character, / to set the position,
		- Parental Lock – Restricts usage of network	your ISP on paper, enter it in the “Primary DNS Server”			and ENTER to confirm your selection.
		functions (page 42).
			field. In case there are more than two DNS server
	• Language – Language can be set the NETWORK				8 Select ‘OK’ to confirm the IP Address/Proxy setup.
			addresses, enter “Secondary DNS Server” in the other
		function OSD screen (page 42).	DNS server address field.
	• Firmware Update – Use to update the receiver’s
			• Proxy Hostname/Proxy Port		Friendly Name
		software and check the version (page 42).
			This setting is required when you connect this receiver to
	• Factory Reset – Use to reset all network connection					Select ‘Network Configuration’ from the Network
			the Internet via a proxy server. Enter the IP address of your
		settings to their initial, factory-setting condition			1 Setup menu.
			proxy server in the “Proxy Hostname” field. Also, enter the
		(page 42).			2
			port number of your proxy server in the “Proxy Port” field.			Select ‘Friendly Name’ from the Network
	• System Info – You can check the network settings of
			1
						Configuration menu.
				Select ‘Network Configuration’ from the Network
		this receiver (page 42).			3
				Setup menu.		Select ‘Edit Name’ then select ‘Rename’.
Network Configuration			2
						If after changing the name you want to restore the name
				Select ‘IP Address, Proxy’ from the Network
						to the default, select Default.
IP address/Proxy setting				Configuration menu.	4
			3
In case the router connected to the LAN terminal on this						Input the name you want.
				Select the DHCP setting you want.
receiver is a broadband router (with a built-in DHCP server				When you select ON, the network is automatically set up,		Use / to select a character, / to set the position,
function), simply turn on the DHCP server function, and you				and you do not need to follow Steps 4. Proceed with Step		and ENTER to confirm your selection.
will not need to set up the network manually. You must set up				5.
the network as described below only when you have

connected this receiver to a broadband router without a

41